Blade 200 SR X RTF Manual de instrucciones descargar pdf (Pagina 4)

The battery charger (EFLC3105) included with your

helicopter has been designed to safely charge the Li-Po

battery.

CAUTION: All instructions and warnings must be

followed exactly. Mishandling of Li-Po batteries

can result in a ﬁ re, personal injury and/or property

damage.

• By handling, charging or using the included Li-Po battery,

you assume all risks associated with lithium batteries.

• If at any time the battery begins to balloon or swell,

discontinue use immediately. If charging or discharging,

discontinue and disconnect. Continuing to use, charge or

discharge a battery that is ballooning or swelling can result

in ﬁ re.

• Always store the battery at room temperature in a dry area

for best results.

• Always transport or temporarily store the battery in a

temperature range of 40–120º F (5–49° C). Do not store the

battery or model in a car or direct sunlight. If stored in a hot

car, the battery can be damaged or even catch ﬁ re.

• Always charge batteries away from ﬂ ammable materials.

• Always inspect the battery before charging.

• Always disconnect the battery after charging, and let the

charger cool between charges.

• Always constantly monitor the temperature of the battery

pack while charging.

• ONLY USE A CHARGER SPECIFICALLY DESIGNED TO CHARGE

LI-PO BATTERIES. Failure to charge the battery with a

compatible charger may cause a ﬁ re resulting in personal

injury and/or property damage.

• Never discharge Li-Po cells to below 3V under load.

• Never cover warning labels with hook and loop strips.

• Never leave charging batteries unattended.

• Never charge batteries outside recommended levels.

• Never charge damaged batteries.

• Never attempt to dismantle or alter the charger.

• Never allow minors to charge battery packs.

• Never charge batteries in extremely hot or cold places

(recommended between 40–120° F or 5–49° C) or place in

direct sunlight.

Charging Warnings

First Flight Preparation

• Remove and inspect contents

• Begin charging the ﬂ ight battery

• Install the ﬂ ight battery in the helicopter

(once it has been fully charged)

• Program your computer transmitter (BNF only)

• Bind your transmitter (BNF only)

• Familiarize yourself with the controls

• Find a suitable area for ﬂ ying

Flying Checklist

❏ Always turn the transmitter on ﬁ rst

❏ Plug the ﬂ ight battery into the lead from the ESC

❏ Allow the receiver and ESC to initialize and arm properly

❏ Fly the model

❏ Land the model

❏ Unplug the ﬂ ight battery from the ESC

❏ Always turn the transmitter off last

1 2 3 4 5 6 7 8 9 ... 17 18

Comentarios a estos manuales

Sin comentarios

Blade 200 SR X RTF Manual de instrucciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Juguetes con control remoto Blade 200 SR X RTF