Blade mCP X V2 RTF Manual de instrucciones descargar pdf (Pagina 5)

Battery Charging

Celectra™1-Cell3.7VVariableRateDCLi-PoCharger

Instructions

1. Connect the power supply to an appropriate power

source.

2.Inserttheoutputplugfromthepowersupplyinto

thepowerinputslotoftheVariableRateCharger.

3.Selecttheappropriatechargecurrentforyour

battery by pushing the + or -, which are the smaller

buttonstotherightandleftoftheStart(middle)

button,(Whenchargingyour200mAhbattery,set

thechargerto0.7amps).

4.ConnectthechargeadaptertotheChargerlead.

Match the red dots on both the charge adapter and

the Charger lead.

5. Properly connect the battery to the Charger lead. Match the red dots on both the battery and charger

connectors.

6.PressthestartbuttonontheVariableratechargertobeginthechargingprocess.

NOTICE: Only use the included charger.

CAUTION: NEVER attempt to power

the charger from an AC outlet without

the use of a proper AC to DC adapter/power

supply.

CAUTION: DO NOT connect charged

or discharged Li-Po batteries if the

power supply is connected to the charger

while the power supply is not connected to a

power source. Doing so will discharge and

possibly damage the batteries.

LED functions under normal operation:

SINGLE SOLID LED ShowsChargeCurrent

SINGLE LED FLASHING Charging

MULTIPLE LEDs FLASHING Charge Almost Complete

LEDs SWEEPING SIDE TO SIDE Charge Complete

First Flight Preparation

• Remove and inspect contents

• Begin charging the ﬂight battery

• Install the four AA batteries in the transmitter

(RTF ONLY)

• Install the blades appropriate to your ﬂying style.

The Fast Flight Main Rotor Blade Set is best used

for outdoors or a smoother ﬂying style. The

High-performance Main Rotor Blade Set is

intended for indoors or aggressive aerobatic

maneuvers

• Install the ﬂight battery in the helicopter (once it

hasbeenfullycharged)

• Programyourcomputertransmitter(BNFOnly)

• Test the controls

• Familiarize yourself with the controls

• Find a suitable area for ﬂying

Flying Checklist

❏ Always turn the transmitter on ﬁrst

❏ Plug the ﬂight battery into the lead from the

3-in-1controlunit

❏ Allowthe3-in-1controlunittoinitializeand

arm properly

❏ Fly the model

❏ Land the model

❏ Unplugtheightbatteryfromthe3-in-1

control unit

❏ Always turn the transmitter off last

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comentarios a estos manuales

Sin comentarios

Blade mCP X V2 RTF Manual de instrucciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Juguetes con control remoto Blade mCP X V2 RTF